DismantlingOperating_Manual_Fan_KXE_04_en.docx 119 / 128Dismantling of the fan may be necessary for the followingreasons:- Relocation to another installation site- Replacement with a new fan- ScrappingClose the duct work which was connected to the fan.All work on the fan must be carried out exclusively bycompetent persons with the fan switched off and theimpeller at a complete standstill.All tasks on the electrical connections may only becarried out by electrical specialists.DANGERAll tasks with and on the fan!Fatalities or extremely serious injuries as a result oftransport, mounting, commissioning and start-up, operation,operating, troubleshooting, inspection, maintenance, repair,shutting-down, dismantling and disposal.→ Wear personal protective equipment.→ Observe safety regulations.→ Observe the regulations for the prevention of accidents.ATTENTION!Harmful to the environment!Dispose of individual parts of the fan, accessory partsand lubricants in an environmentally-friendly manner,and in accordance with the requirements of therespective country of use.NOTICE!Allow dismantling to be carried out professionally bya REITZ service technician.17. Dismantling
