Configuring The Instrument 2-5Installation The instrument can be installed in any slot except slot 0 in a VXIbusmainframe. When inserting the instrument into the mainframe, itshould be gently rocked back and forth to seat the connectors intothe backplane receptacle. The ejectors will be at right angles to thefront panel when the instrument is properly seated into thebackplane. Use two captive screws above and below the ejectors tosecure the instrument into the chassis.After installation, perform an initial checkout and operationalverification.Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
