RadioLink RC3S Instruction Manual

Also see for RC3S: Instruction manual

RadioLink RC3S Instruction Manual Manual pdf 16 page image

throttle15side when you want to make the rise milder.(Note: In the interface of adjusting the value, return to the initial value"0" by pressing“Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.)(2). Press “Enter” button, the adjusted BRK value stops blinking, now the BRKvaluehas been set.3. When ending setting, return to the initial screen by pressing “Exit” button twice.Throttle servo delaySudden trigger operation on a slippery road only causes the wheels to spin andthe ve-hicle cannot accelerate smoothly. Setting the throttle speed function reduceswasteful battery consumption while at the same time permitting smooth, enjoyableoperation.OperationThrottle servo (amp) operation is delayed so that the drive wheels will not spin even ifthe trottle trigger is operated more than necessary. This delay function is notperformed when the trottle trigger is returned and at brake operation.OFF,Speed1 or speed 2 can be selected.OFFmeans shut down the throttle speed functionAdjustment method for SPEED 1Setup itemsMODE: Speed type selectionALL: Speed adjustmentAdjustment range1~100 (each direction)At 100, there is no delay1.Enter the function menu and use “Dec(-)”or“Inc(+) ” button to access THSPDThrottle Speed "THSPD"