RadioLink RC3S Instruction Manual

Also see for RC3S: Instruction manual

RadioLink RC3S Instruction Manual Manual pdf 28 page image

27Brake side adjustmentThis function decreases the set value when the braking effect is strongandincreases the set value when the braking effect is weak.Setup ItemRATE:Brake amountBrake amount (RATE)0~100%Initial value: 100%1.Enter the function menu and use “Dec(-)” or “Inc(+)”button to access ATL function.2.Press “Enter” button to get into ATL function interface.3.Press “Enter” key, and the initial value of RATE will blink. Use “Dec(-)” or“Inc(+)” button to adjust the value.(Note: In the interface of adjusting the value, return to the initial value "100%"bypressing “Dec(-)” and “Inc(+)” buttons simultaneously for about 1 second.)Press “Enter” button, the adjusted value stops blinking , now the value has been set.4.When ending setting, return to the initial screen by pressing“Exit” button twice.Programmable mixes between arbitrary channelsThese functions allow you to apply mixing between the steering,throttle, andchannel3 channels.Setup itemsLEFT:Mixing rate (Left side)RGHT:Mixing rate (Right side)MST:Master channelSLV:Slave channelProgrammable Mixes "PMIX"ATL Function "ATL"