RADWIN 5000 HPMP User Manual Release 3.1.00 1-2Key features of RADWIN 5000 HPMP Chapter 1A Sector consists of a BS and a group of SUs within the angular sector covered by the BSantenna. A Sector is typically 60° or 90° depending of course on the choice of antenna.BSs may be collocated to provide sectorial coverage up to 360°.The RF characteristics of a Sector will be common to each radio: Frequency (regulation),band and channel bandwidth. Adjacent Sectors in a PtMP network will typically use differentfrequencies and non-overlapping bands to mitigate mutual BS interference.The RADWIN 5000 HPMP product suite supports considerably higher capacity than other cur-rent technologies (such as Wi-Max). We distinguish between generic BSs and SUs and RAD-WIN units, relabelling the latter, HBSs and HSUs (H=hich capacity).Key features of RADWIN 5000 HPMP» 100 Mbps aggregate net throughput, full duplex» Configurable Maximum Information Rate (MIR) per HSU» Long Range – 40km @ 20Mbps» Advanced OFDM & MiMO 2x2 for nLOS performance» Enhanced interference mitigation capability» Inter & intra site sync. to reduce self interference» Long range – up to 40 km/25 miles» Dedicated traffic bandwidth allocation ensuring SLA & latency» Low latency – min < 3ms, typical 4 to 10ms» Channel bandwidth – 20 MHz» Regulation - FCC/ETSI/WPC/UNI /MII» Multi band HBSs and HSUs» Simple to deploy» Fully integrated with RADWIN Legacy solutions:• Coexists with RADWIN 2000 and WinLink 1000 products• Common RADWIN Manager
