Radwin RW-5200-0250 User Manual
Also see for 5000 HPMP: User manualUser manualUser manual
                                                                                                                         | |
Contents
| 
RADWIN 5000 HPMP User Manual Release 3.1.00 3-9Mounting external antennas Chapter 3Prior to connecting cables to the ODU, the protective earth terminal (screw)of the ODU must be connected to an external protective ground conductoror to a grounded pole.Warning • Only a qualified person using the proper safety equipment shouldclimb the antenna mast• Only qualified professional personnel should install or dismantleODUs and mastsinto the unit causing damage.) It is possible to mount an ODU horizontally. SeeChapter 17 for details.3. Refer also to Chapter 17 for detailed ODU mounting kit contents and schematics.Note• Do not tighten the ODU to its mounting brackets until the alignmentprocess of the antenna is complete.• Ensure that there are no direct obstructions in front of the ODU orinterference from man-made obstacles.Mounting external antennasIf you are using ODU with an integrated antenna, skip to Mounting the Lightning Protec-tion Devices below.The supplied mounting kit is used to mount the antenna onto a pole. The antennas must bealigned for maximum throughput.WarningNever stand in front of a live antenna! To mount an external antenna:1. To mount an external antenna, ensure that the antenna is properly grounded andthen mount the antenna onto the pole. Refer to Chapter 17 for detailed antennamounting instructions.2. Follow the mounting instructions supplied with the antenna.Mounting the Lightning Protection DevicesThe use of lightning protection is dependent on regulatory and end user requirements. TheRADWIN 5000 HPMP ODU is designed with surge limiting circuits to minimize the risk of dam-age due to lightning strikes. RADWIN recommends the use of additional surge arrestordevices to protect the equipment from nearby lightning strikes.Refer to Chapter 18 for detailed installation instructions of lightning protection devices.Outdoor Connections To complete the outdoor connections:1. Connect the ground cable to the ODU chassis as marked on the ODU. |
Related manuals for Radwin 5000 HPMP
manualsdatabase
Your AI-powered manual search engine