Rae VRAE PGM-7800 Operation And Maintenance Manual

Contents

Rae VRAE PGM-7800 Operation And Maintenance Manual Manual pdf 73 page image

PROGRAMMING OF VRAE4 - 274.6.6 Enable / Disable DatalogThe user can choose to enable or disable the dataloggingfunction on each individual sensor. This allows users toselectively log certain sensor readings of interest.1. “Enable / Disable Datalog?” is the sixth sub-menu item inTable 4.5.2. Press [Y/+] key. The display shows all the installedsensors in the monitor. A previously selected sensor tobe datalogged is marked with an “* ” next to the sensorname. The cursor is blinking at the first sensor location.Press [Y/+] key to enable the datalogging for the sensorand [N/-] key to disable the datalogging.CO* SO2 H2S*LEL pick OXY3. Press [MODE] key momentarily to move from onesensor location to the next one. Repeat Step 2 until allthe sensors that needed to be datalogged are selected.Press and hold [MODE] key for 1 second to save thenew sensor selection.4. The display shows “Save?” To confirm the newselection, press the [Y/+] key to accept the change. Pressthe [N/-] key or the [MODE] key to discard the changeand return to the first datalog sub-menu.