Rae microrae User Manual

Also see for microrae: Quick start guide

Rae microrae User Manual Manual pdf 15 page image

MicroRAE User’s Guide153.4. Glance ModeIf you want to check your instrument’s configuration and it is turned off, you do not haveto turn it on. Press and hold [Y/+] until the screen illuminates and shows theconfiguration. This tells you the installed sensors:Press [Y/+] to advance through screens that tell you if the radio is on, BLE is on, GPS ison, WiFi is on, etc. These change, depending on the instrument’s configuration.To exit, press [MODE], and the display shuts off.Note: If you do not press a button for 60 seconds, it turns off automatically.3.5. Panic AlarmPress and hold [Y/+] at any time to trigger the Panic Alarm. The display shows “PANICALARM” and sends a message to the Location Manager or ProRAE Guardian.(Note: Use ProRAE Studio II to define information and its prioritization for viewing.)In addition, the instrument alarms (audible and visible) four times per second. Theinstrument also sends an emergency message to the Location Manager or ProRAEGuardian.Press [Y/+] to clear the alarm. The alarm stops and the display returns to the mainreading screen.3.6. Confidence LEDYou can use ProRAE Studio II to program the MicroRAE to continually provide an LEDblink every 3 seconds so that you can tell without looking closely that the instrument isworking.