MicroRAE User’s Guide5919. Controlled Part of the Manual for PGM-2600SAFETY INSTRUCTIONSRead Before OperatingThis Manual must be carefully read by all individuals who have or will have theresponsibility of using, maintaining, or servicing this product. The product will performas designed only if it is used, maintained, and serviced in accordance with themanufacturer’s instructions. The user should understand how to set the correct parametersand interpret the obtained results.CAUTION!The PGM-2600 shall only be charged using a charger specifically supplied for use withthe unit (for example part number 3A-066WPxx or 3A-401WP12, manufactured by ENGElectric), approved as SELV or Class 2 equipment against IEC 60950 or an equivalentIEC standard. The maximum voltage from the charger shall not exceed 6.0 Vdc.Likewise, any data download device connected to the PGM-2600 shall also be approvedSELV or Class 2 equipment.Use of non-RAE Systems components will void the warranty and can compromise thesafe performance of this product.