Rainforest Automation EMU-2 User Manual
Also see for EMU-2: Quick start guideTechnical manualQuick start guideQuick start guide
                      | |
Contents
| 
EMU-2™User Manual16is shown in the upper right of the screen. The average cost per pay for the previoustime period is shown in the lower right of the screenThis screen is overwritten with the values from the Total to Date screen each time thecurrent time period is restarted. If the current time period has not been restarted atleast once, then there will be no data values for this screen and it will not be displayed.Current PriceThe Current Price screen shows the priceof electricity that is currently in effect. Therate is shown in cents per kilowatt-hour.The current price is usually obtained fromthe value you manually set in the Set Ratescreen. To manually set the current pricevalue, simply press and release bothbuttons simultaneously. This will put youin Configuration Mode. Move through theRestart screen and Select Languagescreen to get to the Set Rate screen, where you can change the current price value.This new value will become the current price, and the Rate Label will be displayed as“Set by User”. It is also possible to read the price directly from the smart meter. If youmanually set the price to zero, and the meter supports this feature, then the EMU-2™will check the price with the meter every 2 minutes. If no price value has been set –either by the smart meter or manually – then dashes are shown for the price digits. Forsome utilities, the price can also be set by a special message sent to the meter by theutility. This message will be displayed as a text message on the Message screen, andthe price will be automatically set. This will override any price value that has been setmanually.MessageThe Message screen will display a textmessage when there is a message fromyour utility. Your EMU-2™ checks every 2minutes for a new message. When a newmessage is received, the Indicator LEDLights will flash in a special red-yellowsequence to show that a new message iswaiting for you to see. The envelope iconwill also appear in the upper left handcorner of the screen to indicate that thereis an active message. To see the message, use the buttons to go to the MessageCurrent Price12.4¢/kWhSet by UserMessageYour bill is past due.Please contact us at yourearliest convenience at thefollowing number: ▼ |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine