Rangemaster Professional+ FXP 90 Dual Fuel User's Manual & Installation Instructions

Also see for Professional+ FXP 90 Dual Fuel: User's guide & installation instructions User's guide & installation instructions

INSTALLATIONCheck the appliance is electrically safe and gas sound when you have finished.28ArtNo.281-0026 - Front plinthFinal FittingFitting the PlinthRemove the 3 screws for the plinth mounts along the frontbottom edge of the range (Fig. 7.15). Fasten the plinth usingthese screws (alternative colour screws can be found in theloose parts pack).Refitting the DrawerTo refit the drawer in the cooker, pull the side rails fully out(Fig. 7.16). Make sure the inner race is forwards.Carefully move the drawer back between the rails and rest iton the side rails (Fig. 7.17).Push the drawer back until the clips click into place.Refitting the Oven DoorTo refit the door, slide the hinges back into their slots. Rotatethe locking ‘U’ clips back to fit onto the hinges.Customer CareInstaller: Please complete your details in this guide, informthe user how to operate the cooker and hand over theinstructions.Thank you.Make sure the innerrail is forwardsFig. 7.15Fig. 7.16Fig. 7.17