Rangemaster Toledo 110 Ceramic User Manual

Also see for 110 Ceramic: User guide User guide User's guide & installation instructions User's guide & installation instructions

Rangemaster Toledo 110 Ceramic User Manual Manual pdf 20 page image

18Once you have removed as much as possible with the scraper,follow the ‘Daily Care’ procedure outlined above.To Remove Metal Rub-offSliding pans on the hob – especially aluminium or copperpans – can leave marks on the surface. These marks oftenappear like scratches, but can easily be removed using theprocedure described previously for ‘Cleaning Spills’. If therub-off marks are especially stubborn, use a cleaning creamtogether with the razor scraper, as described in ‘CleaningBurned-on Spills’.GrillsThe grill pan and grid should be washed in hot soapy water.After grilling meats or any foods that soil, leave to soak for afew minutes immediately after use. Stubborn particles maybe removed from the grid using a nylon brush. Alternatively,the grill pan can be washed in a dishwasher. Before you remove any of the grill parts for cleaning,ensure that they are cool, or use oven gloves. DO NOT use any abrasive substances.Removing the Glide-out GrillThe glide-out grill pan can be easily removed for cleaning asfollows. Remove the grill pan support frame by pulling thegrill pan forward (Fig.5-2).Lift the grill pan clear of the support frame. The support frameis held to the side rails by two clips on each side (Fig.5-3).For each side, support the side rail with one hand and withthe other hand lift the frame up and out of the side clips(Fig.5-4).For safety, push the side rails back into the grill chamber.If you need to remove the side rails to allow cleaning of thegrill chamber, you can unhook them from the grill chambersides (Fig.5-5) and wipe the sides clean with a soft cloth andmild detergent. DO NOT put the side runners in a dishwasher.Once you have finished, hook the side rails back onto thesides of the chamber. To refit the frame, pull the side railsforward and, for each side in turn, support the side rail andpress the frame down into the side rails. Replace the grill pan.When refitting the grill pan, ensure that the wide rim is at thefront (Fig.5-6).Control Panel and DoorsAvoid using any abrasive cleaners, including cream cleaners,on brushed stainless steel surfaces. For best results, use aliquid detergent or our Multi-purpose Cleaner.The same cleaner can also be used on the doors. Alternatively,use a soft cloth wrung out in clean hot soapy water. You canuse the same method for cleaning the control panel andknobs (although we do supply a specialist Fascia Cleaner).After cleaning, polish with a dry cloth.ArtNo.331-0001Grill pan pulled forwardsFig.5-2ArtNo.331-0003 Grill frame out, no panArtNo.331-0004 Removing the grill frameFig.5-3Fig.5-4ArtNo.331-0005 Removing the grill railFig.5-5ArtNo.331-0006 Grill pan planFig.5-6