Ransomes HIGHWAY 2130 Safety And Operation Manual

Also see for HIGHWAY 2130: Maintenance and parts manual Parts and maintenance manual Safety and operation manual Safety and operation manual Parts and maintenance manual

Contents

Ransomes HIGHWAY 2130 Safety And Operation Manual Manual pdf 10 page image

GB-8GBRANSOMES HIGHWAY 2130SAFETY AND OPERATORS MANUALERUTAREPMET YTISOCSIVLIO)F°93(C°4EVOBA 03EAS)F°93(C°4WOLEB 03-W01ro03-W5EAS4 SPECIFICATIONS4.4 VIBRATION LEVELThe machine was tested for whole body and hand/arm vibration levels. The operator was seated inthe normal operating postion with both hands on thesteering mechanism. The engine was running andthe cutting device was rotating with the machinestationary.Standard ISO 5349: 1986 Mechanical vibration.Guidelines for the measurement and theassessment of human exposure to hand-transmitted vibration.Standard ISO 2631-1: 1985 Evaluation of humanexposure to whole body vibration -- Part 1: Generalrequirements.4.5 SLOPESDO NOT USE ON SLOPES GREATER THAN 15°The slope 15° was calculated using static stabilitymeasurements according to the requirements ofEN 836.4.6 RECOMMENDED LUBRICANTSEngine oil: Should be to MIL-L-2104C or toA.P.I. Classification SE/SF/SGgrades. [10W-30]Hydraulic Oil: Shell Tellus 46 to ISO VG46, orequivilantGrease: Shell Darina R2, or equivilant.4.7 CUTTING PERFORMANCE47 cuts per meter at 12 km/hr with 8 knife floatinghead units.65 cuts per meter at 12km/hr with 11 knife floatinghead units.24 cuts per meter at 12 km/hr with 4 knife fixedhead units.35 cuts per meter at 12 km/hr with 6 knife fixedhead units.4.8 CUTTING PERFORMANCE (AREA)2.3 Hectares/hour at 12 km/hr with float head units.2.3 Hectares/hour at 12 km/hr with fixed headunits.A 10% allowance is included for normal overlapsand turning at the end of each cut.0312yawhgiHKD/SC/UC/JWseireSnoitareleccAmrA/dnaHlevelHRroHLxaMs/msnoitareleccA 2qeAX qeAY qeAZ313,0 953,0 422,0eulaVtnanimoD 953,00312yawhgiHUC/JWseireSKD/SC/ydoBelohWnoitareleccAlevelnoitacoLroolFs/msnoitareleccA 2noitacoLtaeSs/msnoitareleccA 2x y z x y znaeM 8420,0 9510,0 2570,0 010,0< 0910,0 3310,0