Raritan DOMINION KX User Manual

Also see for Dominion KX: User guide Brochure Quick installation and setup guide Quick installation and setup guide Quick installation and setup guide

Contents

Raritan DOMINION KX User Manual Manual pdf 27 page image

CHAPTER 3: RARITAN REMOTE CLIENT 1919− Description: Type a text name that identifies the Raritan device you are configuring, such as“Atlanta_Datacenter.” This name will identify the device in the RRC Navigator.− Connection Type: Select TCP/IP Connection for a LAN/WAN connection, or select Dial-UpConnection for a direct analog modem connection to the Raritan device.For a TCP/IP Connection, select the option button before the method by which RRC should locateyour Raritan device:− IP Address: Type the IP address assigned to your Raritan device (see Chapter 4:Administrative Functions, Network Configuration).− Name: Type the name assigned to your Raritan device during initial setup (see Chapter 4:Administrative Functions, Network Configuration).− DNS Name: If you have configured your DNS server to resolve a DNS name to the IPaddress that you have assigned to your Raritan device, type the DNS name.Note: If using dynamic DHCP addressing, select the option button to Find Dominion KX by Name. Thefactory default unit name for each Dominion KX produced is Dominion KX. To change the default nameon a Dominion KX unit and institute a unique name, please see Chapter 4.For a Dial-Up Connection, enter the dialing parameters that RRC should use to establish a connection:− Phone Number: Be sure to include any additional codes that RRC should dial to establish aconnection, such as country codes, area codes, or outside line access codes.− Modem: Select the modem, as configured in Windows, that RRC should use to dial andconnect to your Raritan device.Select a TCP Port to use:− Use Default Port Number: Dominion KX is configured by default to use TCP Port 5000 forcommunicating with RRC. Dominion KX can be configured to use a different TCP Port (seeChapter 4: Administrative Functions, Network Configuration); if so, uncheck the UseDefault Port Number option, and enter the configured TCP Port to be used.b. Compression tabFigure 15 Compression TabSettings under the Compression tab are adjustable via the RRC client, and not necessary for pre-configuration in the Connection Profile. If you wish to pre-configure these settings, however, pleaserefer to the section Connection and Video Properties in this chapter.