Chapter 6: User Management156Setting Permissions for an Individual GroupTo set permissions for an individual user group:1. Locate the group from among the groups listed. Individual groupscan be identified by the @ in the Group Name.2. Click the Group Name. The Group page opens.3. Select the appropriate permissions.4. Click OK.Modifying an Existing User GroupNote: All permissions are enabled (and cannot be changed) for theAdmin group.To modify an existing user group:1. From the Group page, change the appropriate fields and set theappropriate permissions.2. Set the Permissions for the group. Select the checkboxes before thepermissions you want to assign to all of the users belonging to thisgroup. See Setting Permissions (on page 155) for moreinformation.3. Set the Port Permissions. Specify the server ports that can beaccessed by users belonging to this group (and the type of access).See Setting Port Permissions (on page 153) for more information.4. Set the IP ACL (optional). This feature limits access to the DominionKX II device by specifying IP addresses. See Group-Based IP ACL(Access Control List) (on page 153) for more information.5. Click OK.To delete a user group:Important: If you delete a group with users in it, the users areautomatically assigned to the user group.Tip: To determine the users belonging to a particular group, sort the UserList by User Group.1. Choose a group from among those listed by checking the checkboxto the left of the Group Name.2. Click Delete.3. When prompted to confirm the deletion, click OK.
