10In This ChapterOverview..................................................................................................10Default Logon Information .......................................................................10Getting Started ........................................................................................11Step 1: Connect the Equipment ..............................................................11Step 2: Dominion KX II Initial Configuration ............................................14Step 3: Configure KVM Target Servers...................................................22Step 4 (Optional): Configure Keyboard Language ..................................34Step 5: Configure Network Firewall Settings...........................................35OverviewThis section provides a brief overview of the installation process. Eachstep is further detailed in the remaining sections of this chapter.To install and configure the Dominion KX II:• Step 1: Connect the Equipment (on page 11)• Step 2: Dominion KX II Initial Configuration (on page 14)• Step 3: Configure KVM Target Servers (on page 22)• Step 4 (Optional): Configure Keyboard Language (on page 34)• Step 5: Configure Network Firewall Settings (on page 35)Also included in this section is the default logon information you willneed. Specifically, the default IP address, user name, and password.See Default Logon Information (on page 10).Default Logon InformationDefault ValueUser name The default user name is admin. This user hasadministrative privileges.Password The default password is raritan.Passwords are case sensitive and must be enteredin the exact case combination in which they werecreated. For example, the default password raritanmust be entered entirely in lowercase letters.The first time you start the Dominion KX II, you arerequired to change the default password.Chapter 2 Installation and Configuration
