Chapter 4: Virtual Media29Prerequisites for Using Virtual MediaKX III Virtual Media Prerequisites For users requiring access to virtual media, the KX III permissionsmust be set to allow access to the relevant ports, as well as virtualmedia access (VM Access port permission) for those ports. Portpermissions are set at the group-level. A USB connection must exist between the device and the targetserver. If you want to use PC-Share, Security Settings must also be enabledin the Security Settings page. Optional You must choose the correct USB profile for the KVM target serveryou are connecting to.Remote PC VM Prerequisites Certain virtual media options require administrative privileges on theremote PC (for example, drive redirection of complete drives).Note: If you are using Microsoft Vista or Windows 7, disable UserAccount Control or select Run as Administrator when startingInternet Explorer. To do this, click the Start Menu, locate IE, right-click and select Run as Administrator.Target Server VM Prerequisites KVM target servers must support USB connected drives. USB 2.0 ports are faster and preferred.CIMs Required for Virtual MediaYou must use one of the following CIMs is to use virtual media: D2CIM-VUSB D2CIM-DVUSB D2CIM-DVUSB-DVI D2CIM-DVUSB-HDMI D2CIM-DVUSB-DPThe black connector on the DVUSB CIMs are used for the keyboard andmouse. The gray connector is used for virtual media.Keep both plugs of the CIM connected to the device.The device may not operate properly if both plugs are not connected tothe target server.
