Chapter 5: Virtual KVM Client (VKC) Help40Virtual KVM Client Java Requirements - KX IIIJava™ 1.7 is required to use the Java-based Virtual KVM Client (VKC).Proxy Server Configuration for Use with Virtual KVM Client (VKC) andActive KVM Client (AKC)When the use of a Proxy Server is required, a SOCKS proxy must alsobe provided and configured on the remote client PC.Note: If the installed proxy server is only capable of the HTTP proxyprotocol, you cannot connect.To configure the SOCKS proxy:1. On the remote client PC, select Control Panel > Internet Options.a. On the Connections tab, click 'LAN settings'. The Local AreaNetwork (LAN) Settings dialog opens.b. Select 'Use a proxy server for your LAN'.c. Click Advanced. The Proxy Settings dialog opens.d. Configure the proxy servers for all protocols.IMPORTANT: Do not select 'Use the same proxy server forall protocols'.Note: The default port for a SOCKS proxy (1080) is different fromHTTP proxy (3128).e. Click OK at each dialog to apply the settings.2. Next, configure the proxy settings for the Java™ applets:a. Select Control Panel > Java.b. On the General tab, click Network Settings. The NetworkSettings dialog opens.c. Select "Use Proxy Server".d. Click Advanced. The Advanced Network Settings dialog opens.e. Configure the proxy servers for all protocols.IMPORTANT: Do not select 'Use the same proxy server forall protocols'.Note: The default port for a SOCKS proxy (1080) is different fromHTTP proxy (3128).