Chapter 5: Virtual KVM Client (VKC) Help79Operating System Audio Playback SupportReview the table shown here to see which Raritan client works withaudio playback/capture for each operating system:Operating system Audio playback and capture supportedby:Windows® Active KVM Client (AKC) Virtual KVM Client (VKC)Linux® Virtual KVM Client (VKC)Mac® Virtual KVM Client (VKC)Connecting and Disconnecting from a Digital Audio DeviceAudio device settings are applied on a per KX III device basis.Once the audio devices settings are configured and saved on the KX III,the same settings are applied to it.See Saving Audio Settings (on page 78) for more information.Note: If you are using the audio feature while running PC Share modeand VM Share mode, see Audio Playback and CaptureRecommendations and Requirements (on page 75) for importantinformation. See also Connecting to Multiple Targets from a SingleRemote Client (on page 78).Connect to a Digital Audio DeviceTo connect to an audio device:1. Connect the audio device to the remote client PC prior to launchingthe browser connection to the KX III.2. Connect to the target from the Port Access page.3. Once connected, click the Audio button in the toolbar.The Connect Audio Device dialog appears. A list of available audiodevice connected to the remote client PC is displayed.Note: If there are no available audio devices connected to the remoteclient PC, the Audio icon is grayed out. .4. Check Connect Playback Device if you are connecting to a playbackdevice.5. Select the device that you wish to connect from the drop-down list.
