Chapter 2: Getting Started235. If your network supports IPv6, click the IPv6 Settings tab, and repeatthe above step for configuring IPv6 settings. Note that IPv6 providesthe "Ignore" option instead of the "Disabled" option to disable theIPv6 networking. SeeIPv6 Settings (on page 187).6. For additional settings, click the Ethernet tab. SeeEthernetSettings (on page 190).7. Click OK. The new network settings apply now.Logout or ShutdownBoth logout and shutdown commands are available under Leave in theMain Menu.•Log Out: Logs the user out of the User Station.Shut Down: Provides the following options. Click the one you prefer,or the User Station will automatically shut down in one minute. Fordetailed information, seeDevice Resume or Screen Unlocking (see"Screen Unlocking" on page 198).Restart: Restarts the User Station.Shut Down: Powers off the User Station. You should always use thesoftware command as the only method to power off your UserStation.Tip: An alternative to trigger the shutdown options is to pressCtrl+Alt+Delete. See Desktop Settings.Warning: Do NOT turn the User Station off by holding down the Powerbutton or unplugging the power cord because such operations maydamage the User Station. A short press of the Power button initiates agraceful shutdown that does not save open KVM sessions.VESA Mount (Optional)You can mount the Dominion User Station onto the back of a monitorwith 75 or 100 mm VESA standards.Below shows the VESA MOUNT kit:
