40Targets and Access methods are managed in the User StationConfiguration window. SeeUser Station Configuration (on page 27).The Targets and Access methods feature offers different ways to view,manage, and connect to targets, using KVM port access, as well as RDP,SSH, and VNC. You can configure these additional access methods forany KVM target. You can also configure access methods to reach anon-KVM target device or system that is directly connected to yournetwork. These targets can be any device or system that can be remotelyaccessed by Dominion User Station, such as a server, network switch,HVAC or other.When a KVM switch is added, Dominion User Station automaticallydetects ports and creates a Target with a KVM access method for eachport. The Targets section of the User Station Configuration and the PortsNavigator populates with this information. This gives you an alternativeview of the KVM ports of your managed KVM switches, which are stillavailable to view and access under the Devices section of the PortNavigator. KVM access cannot be added manually--it is always based onaccess to KVM switches you have added to Dominion User Station.You can add other targets and access methods manually to use RDP,SSH and VNC access.Note: If you're working in CC-SG mode, your user experience is different.See Navigator with CC-SG Integration(on page 138).In This ChapterAdding Targets and Access Methods ......................................................... 41Editing and Deleting Targets and Access Methods ................................... 43Known Limitations on Targets ................................................................... 44Chapter 4 Managing Targets and AccessMethods
