CHAPTER 2: I NSTALLATION 13Connect to IP-Reach RemotelyHaving completed the physical installation of IP-Reach, you are now ready to establish an initial networkconnection. Below are basic instructions for doing so. Please see Chapter 3: Raritan Remote Client fordetailed instructions, being sure to review the “KVM Session Properties” and “Color Calibration” sectionsto optimize your IP-Reach performance.Launch Raritan Remote Client (RRC)1. Log into any Windows-based computer with network access to IP-Reach.2. If you are using Windows NT, 2000, or XP, ensure that you are not a “restricted” user.3. Launch Microsoft Internet Explorer. Ensure that your Internet Explorer security settings allow thedownload and execution of ActiveX controls.Note: The Windows default security setting of “Medium” is sufficient.4. In the URL Address field, type the IP address you assigned to IP-Reach in Step II-6. Press [ENTER]to load and launch the web access client.
