Raritan Paragon switch Installation And Operation Manual

Also see for Paragon Manager: User manual

64 PARAGON ADMINISTRATOR’ S I NSTALLATION AND OPERATION GUIDESystem ConfigurationThe System Configuration Menu is used for setting global parameters.1. Press the <Ç> and <È> or <Page Up> and <Page Down> keys to highlight a channel for adevice or computer and press <Enter> to select.2. Please refer to the following section “System Configuration Menu Options” for instructions oninterpreting and editing the menu components.3. When editing is complete, press <Enter> - the highlight will turn yellow.4. Press <S> to save changes, or <Esc> to cancel changes.System Configuration---- -----------------------------------------------------Device ID: UMT8 Switch HWIIDisplay All Computers: NoLogoff Timeout: Off 05 MinutesOperation Mode: PrivateP-View Admin Silent: NoPC Share Timeout: 01 SecLogin Blank: Off 05 MinutesAllow Blank Password: NoDefault Login Name Blank: Yes….. Scrolling Messages Banner…..ScrlLock | Scan | Skip | NCSLFigure 55 System Configuration MenuSystem Configuration Menu Options:1. Device ID: Type desired name of device. This gives device a unique and meaningful name,which is important with multiple Paragon units. The default name for a Paragon switch modelUMT8 is UMT8 Switch HWII.2. Display All Computers: By setting this option, the system administrator can allow or preventusers to view all devices on the OSUI, whether or not the user has the security privileges to accessthem. Default setting is No.3. Logoff Time Out: Amount of time in minutes before an inactive user is logged out of the Paragonsystem. Default setting is Off/05 minutes.The two fields of control are:• On/Off: Use <Ç> and <È> keys to toggle On and Off.• Time: Type a number from 01 to 99, or use <Ç> and <È> keys to change the number.