Raven AutoBoom XRT Series Installation Manual
Also see for AutoBoom XRT: Calibration & Operation ManualInstallation manualInstallation manualInstallation manual
                                                                | |
Contents
| 
016-0236-001 Rev. C 19HYDRAULIC SYSTEM INSTALLATIONINSTALL THE LEFT AND RIGHT RETURN HOSESFIGURE 13. Left and Right Return Hoses Installed1. Trace the machine’s left and right cylinder return hoses from the base-end of the tilt cylinders to the machine’shydraulic valve.2. Disconnect the machine’s left and right cylinder return hoses from the machine’s hydraulic valve.3. Install -6 ORFS M/M/F swivel run tee adapter fittings (P/N 333-0012-069) in the return ports of the machine’shydraulic valve.4. Connect the machine’s right cylinder return hose to the opposite end of the tee fitting installed in the rightreturn port.5. Connect the 90° end of the supplied hydraulic hose (P/N 214-1000-494) to the 90° end of the installed teefitting.6. Connect the straight end of the installed hydraulic hose to the installed fitting in Port RT CYL RTN of theAutoBoom valve.7. Connect the machine’s left cylinder return hose to the opposite end of the tee fitting installed in the left returnport.8. Connect the 90° end of the supplied hydraulic hose (P/N 214-1000-494) to the 90° end of the installed teefitting.9. Connect the straight end of the installed hydraulic hose to the installed fitting in Port LF CYL RTN of theAutoBoom valve.To LeftBase End To RightBase End |
Related manuals for Raven AutoBoom XRT
manualsdatabase
Your AI-powered manual search engine