Raven SBGuidance Auto Installation Manual

Also see for SBGuidance Auto: Installation manual Installation manual

Contents

Raven SBGuidance Auto Installation Manual Manual pdf 23 page image

SBGuidance Auto I Rev. A I Claas ATP ReadyPag 23/33 I SBG-Claas ATP Ready-IM-EN-Rev. A5. Mounting DynamIQ ISO/ISOSteering ControllerThe following guidelines have been established formounting the DynamIQ ISO/ISO Steering Controller:• Preferably, place the DynamIQ ISO/ISOSteering Controller next to and at the right sideof the seat. Use the standard DynamIQ ISO/ISOSteering Controller mounting plate (Figure 15).• If it is not possible to attach the DynamIQISO/ISO Steering Controller to the seat bolts,the DynamIQ ISO/ISO Steering Controllershould be attached in an appropriate place inthe cabin that is free from vibrations.• A DynamIQ ISO/ISO Steering Controller mayonly be mounted in a horizontal position (withthe sticker side up). The connectors may beorientated in four directions (0, 90, 180, 270degrees).• By default, the orientation of the DynamIQISO/ISO Steering Controller is set to: horizontalposition with connectors pointing towards therear (as shown in Figure 15). Any otherorientation should be set in the software!Figure 15 ISO Steering Controller on amounting plate.