Transducer connection — Minn Kota transducerD12259-242 311. 600 W sonar variant MFD2. Minn Kota transducer adaptor cable (A62363)3. Minn Kota transducer cable4. Minn Kota transducerFor further information regarding sonar moduleinstallation (including power connection andmounting), refer to the installation instructionssupplied with the sonar module.Sonar variant multifunction displays600 W sonar variantsCHIRP DownVisionTMvariantsa67 a68a77 a78a97 a98a127 a128c97 eS78c127 eS98e7D eS128e97e127eS77eS97eS127Important software requirements for multiplesonar systemsIf your system includes more than one source ofsonar data you must ensure that any CP300 orCP450C sonar modules are running software versionv4.04 or later.This applies to systems which include:• Any number of MFD(s) with an internal sonarmodule plus a CP300 and / or CP450C sonarmodule; or• No MFD(s) with an internal sonar module, butmore than one CP300 or CP450C sonar module.This does NOT apply to any systems that do NOTinclude a CP300 or CP450C sonar module.Note: For software downloads and instructionson how to update the software for your product(s),visit www.raymarine.com/software.4.12 Radar network connectionRadar units are connected to the SeaTalkhs network,usually via a Raymarine® network switch. Onsmaller systems the Radar may be connecteddirectly to the display’s network connection.Radar connected via network switchD12252-34215631. Radar scanner2. Raymarine® network switch3. MFD4. RayNet Radar cable5. VCM (Voltage Converter Module) — (requiredfor Open Arrays)6. Power connectionRadar connected directly to the displayD12253-341231. Radar scanner46 a Series / c Series / e Series installation instructions
