Raymarine E SERIES Installation Instructions Manual

Also see for A series: Installation and operation instructions Installation and operation instructions Installation and operation instructions Installation instructions

Contents

Raymarine E SERIES Installation Instructions Manual Manual pdf 50 page image

4.15 AIS connectionA compatible AIS unit can be connected usingSeaTalkng® or NMEA 0183.Connection using SeaTalkng®D12263-2SeaTalkng1321. MFD2. SeaTalkng® connection to MFD.3. SeaTalkng® AIS receiver / transceiver.An AIS unit can be connected to the MFD byfollowing the details provided in section 4.9 NMEA0183 connection — Power/NMEA/Video cable andthe installation instructions provided with the unit.4.16 Fastheading connectionIf you wish to use MARPA (radar target acquisition)functions on your multifunction display you needeither:• An autopilot connected to the multifunction displayvia SeaTalkng or NMEA 0183. The compass isconnected to the course computer and calibratedvia the pilot control head; or:• A Raymarine or third-party fastheading sensorconnected to the multifunction display via NMEA0183.Note: Please contact your dealer or Raymarinetechnical support for more information.50 a Series / c Series / e Series installation instructions