170 E-Series Networked Display Reference ManualDisplaying vessel identity (AIS)If you have an AIS receiver fitted to your system, you can use the AIS feature to:• Display a target for any other AIS equipped vessels within a specified range of yourboat.• Display voyage information being broadcasted by these targets i.e. their position,course, speed and rate of turn.• Display basic or detailed information for each target vessel including safety criticaltarget data.• Set up a safe zone around your boat.• View alarm and safety related messages.This information is displayed in the form of an overlay or as a dialog box on your radarscreen. To overlay AIS on a radar window:For more information on AIS, refer toChapter 14:Automatic Identification System(AIS).7.11 Setting up your radarThe set up for your radar can be changed from the standard configuration to suit yourparticular needs. Although you will probably only do this when you first use the radar,you may decide to make subsequent adjustments once you become more familiar withthe system. Any settings that you change are retained and become the default settingseven when you power off.To select the Radar Setup menus when a radar window is active:D8435_1CANCEL TARGETTo cancel an individual target:MARPA LIST...ID Bearing Range Course Speed CPA TCPA2 1870T 4.0nm 1300T 1.5kt 4.0nm 8min1 1370T 1.4nm 1800T 2.2kt 1.4nm 2minHighlight target to be cancelledCANCEL ALLTARGETSTo cancel all targets:OKOKD9024_1PRESENTATION AIS LAYERON
