Chapter 2: General Operation 25Sending and receiving information using a PCYou can transfer and retrieve waypoints or routes to and from another instrument orPC using NMEA or SeaTalk hs.With a RayTech 6.0’s planner you can transfer waypoints and routes via a CF memorycard. Such transfers require that the PC be connected to the display’s NMEA port via aserial data cable. RayTech 6.0 will transfer waypoints and routes via SeaTalkhs.To transfer or receive information:1. Select the transfer on NMEA option:2. Press the appropriate soft key to send or receive NMEA:Note: If you wish to stop the transfer at any point, press STOP TRANSFER.3. When transfer is complete, STOP TRANSFER greys out and the soft keys reappear.Password protecting your waypointsIf required, you can prevent access to, modification and sight of your waypoint androute databases and functions by means of a password.Password confirmationWhen Password Protection is enabled and you are attempting to access a passwordprotected function for the first time during a power-cycle, the system will requestconfirmation of your password before you can:• Access WPTS key functions. This does not affect the operation of the MOB function.• Access ROUTES soft key functions.• Create a route from a track. All other track functions are unaffected.• Archive or transfer any waypoints.• Enter the Waypoint Password Setup menu.Note:Once you have provided a password to the system, it must be entered to accessthe Password Setup sub-menu, regardless of the whether Password Protection is set toON or OFF.Disabled data/functionsWhen Password Protection is ON and you have not entered a password you will beunable to:DATA ARCHIVE ANDTRANSFERTRANSFER ONNMEA...D8638_1SEND WPTS ONNMEASEND RTES ONNMEA RECEIVE ON NMEAD6808-2STOP TRANSFER
