232 E-Series Networked Display Reference ManualAlarm Setup MenuThe Alarm Setup Menu is divided into these sub-menus:• System Alarms Setup.• Navigation Alarms Setup.• Radar Alarms Setup.• Fishfinder Alarms Setup.• AIS Alarms Setup.Note: To silence any alarms, press ACKNOWLEDGE.System Alarms SetupSystem alarms will sound in all applications.MENU ITEM OPTIONS(Default in bold)Anchor AlarmSwitches the anchor alarm on or off.OFFONAnchor Alarm RadiusIf theAnchor Alarm is set to ON, an alarm is triggered when youdrift from your anchor position by more than the specified dis-tance.0.01 - 9.99 nm0.10nm(or equivalent in the selectedDistance Unit)TimerSwitches the countdown timer alarm on or offOFFONTimer PeriodIf theTimer is set to ON, the system counts down from the time youspecify. An alarm is triggered when zero is reached.00h01m - 99hrs 59mins00h00mAlarm ClockSwitches the alarm clock on or off.OFFONAlarm Clock TimeIf theAlarm Clock is set to ON, an alarm is triggered when the timeyou specify is reached.00.01 - 24:00hrs00:00Temperature AlarmIf this alarm is set to ON, an alarm is triggered if the temperaturemoves into or out of the range that you have specified inLowerTemperature Limit /Upper Temperature Limit.OFFONLower Temperature LimitSpecifies the lower limit of the temperature range that is to triggertheTemperature Alarm.60°F0°-99.8°FUpper Temperature LimitSpecifies the upper limit of the temperature range that is to triggertheTemperature Alarm.75°F0.2°-99.9°F
