Raymarine ST1000+ Owner's Handbook Manual

Also see for ST1000 Plus Tiller Pilots: Owner's handbook

Contents

Raymarine ST1000+ Owner's Handbook Manual Manual pdf 43 page image

Chapter 4: Installing the Tiller Pilot 41Mounting the socketInstall the tiller pilot socket as follows:1. Attach the template (provided at the back of this handbook) to the selectedbulkhead.2. Carefully drill a 21 mm (53/64 in) clearance hole for the cable boss.3. Drill 4 pilot holes (2.5 mm or 3/32 in) for the self-tapping screws.4. Remove the template.5. Pass the power cable and any other cables (SeaTalk and NMEA) through thebulkhead and the gasket.6. Use a small flat-bladed screwdriver to connect the cable(s) to the socket –refer to the illustrations on the following pages to identify the individual con-nections on the SeaTalk socket. Ensure that the socket is oriented correctlyand note the connection numbers in relation to the keyway..D3296-2CableGasketSocketRubber capScrewPlugFloating nutRetaining ringInstalled socket