Raymarine ST7001 Operating Manual

Also see for SmartPilot ST7001: Commissioning Guide

Contents

Raymarine ST7001 Operating Manual Manual pdf 9 page image

Chapter 1: SmartPilot Operation 31.2 Using the control unitStart-up modeThe SmartPilot always powers up in Standby mode with the display showingthe boat’s current compass heading.Note: You can press standby at any time to return to manual steering.Keypad functionsThe SmartPilot is controlled using simple push-button operations, all ofwhich are confirmed with a short beep. In addition to the main single-keyfunctions, there are several dual key operations.D5448-2trackPress for Track mode from Auto mode(if a navigator is connected)Press to accept waypoint advancePress for 1 second to skip waypointautoPress for Auto modestandbyPress for Standby modePress for 2 secondsto enter Calibration modecourse change keys-1 = Port 1˚-10 = Port 10˚+1 = Starboard 1˚+10 = Starboard 10˚-1 plus -10Press together forAutoTack to port+1 plus +10Press together forAutoTack to starboard-1 plus +1Press together forresponse level-1 plus +1Press for 1 secondfor rudder gainstandby plus autoPress for Wind Vane mode(if a wind vane is connected)respPress to display response levelPress for 1 second for rudder gainw vPress to steer to a fixed wind angleres'mPress to resume previous course&Press to scroll through calibration parameters.Press to adjust response and gaindispPress to display data pagesPress for 1 second for lamp control