14.1 WaypointsA waypoint is a position marked on the screen to indicate a siteor a place to navigate to.As well as acting as position markers, waypoints are also thebuilding blocks used to create routes.Common waypoint functions are accessed using the waypointsmenu. This can be shown at any time by selecting WPT .Waypoint display examplesWaypoints in the chart applicationIn the chart application both active and inactive waypoints areshown. The active waypoint (i.e. the one you are headingtowards) has the box and symbol colors reversed.D11761-2123Item Description1 Inactive waypoint2 Active waypoint3 Alternative waypoint symbolsBy default, all waypoints are indicated on screen by a waypointsymbol (x). You can assign different symbols if required.Waypoints in the radar applicationIn the radar application both active and inactive waypoints areshown. The active waypoint (i.e. the one you are headingtowards) has the box and symbol colors reversed.D11759-2By default, all waypoints are indicated on screen by a waypointsymbol (x). You can assign different symbols if required, orchoose which waypoints are shown.Waypoints in the fishfinder applicationWaypoints in the fishfinder application are represented by avertical line labelled WPT.Showing and hiding waypoint groups / symbolsFrom the chart or radar application:1. Select WPT.2. Select Display Wpts on: Chart, or Display Wpts on: Radardepending on the application you have open.3. The Display Waypoints list is displayed.4. Select Change to switch between Groups and Symbols.A list of Symbols or Groups is displayed.5. Select the Group or Symbol you wish to show/hide from thelist.Selecting on the Symbol/Group will switch between Showand Hide.6. Repeat Step 5 for each waypoint group or symbol you wantto show or hide.The list of waypoints and symbols can also be accessed fromthe Chart and Radar applications menu:• Chart application: Menu > My Data > Display My Data >Select WPTs To Display.• Radar application: Menu > Presentation > Select WPTs ToDisplay.Waypoint context menuPlacing the cursor over a waypoint in the chart or radarapplications displays a context menu showing the waypoint'spositional data and menu items.The context menu provides the following positional data for thewaypoint in relation to your vessel:• Latitude• Longitude• Range• BearingFor inactive waypoints the following menu items are available:• Goto Waypoint• Follow From Here (only available when waypoint is part of aroute.)• Edit Waypoint• Erase Waypoint• Remove Waypoint (only available when waypoint is part of aroute.)• Move Waypoint• Measure• Build Route• Acquire Target (only available if Radar overlay is switchedon.)• Slew thermal camera (only available when thermal camerais connected and operating.)For active waypoints the following menu items are available:• Stop Goto• Restart XTE• Advance Waypoint142 New a Series / New c Series / New e Series
