ReDeal HS 105 User Manual
                                                     | |
Contents
| 
COVER HS Series – User manualCOMEX S.A. 6Remove lateral protection. Unpacked UPS looks like the figure below.Figure 2-3 View of the power supply after removing the housingTip: Remove the screws connecting the UPS power casing to the wooden pallet, and then placethe UPS at the installation point. Disassembly should be carried out with care not to scratch thecase.Verify that the supplied equipment is properly labeled on the back of the UPS door. The labelcontains basic information about model, power, etc.Note: Disposal materials should be disposed of in accordance with local environmentalrequirements.2.4.2 Setting upTo ensure that the power supply is properly mounted, consider the following:1. The UPS and battery compartment that will work with it should be large enough toaccommodate the various components of the system. The dimensions and weight of theUPS are described in the further part of this manual. The dimensions and weight of theracks / cabinets with batteries depend on the chosen system's autonomy and thereforethe quantity and capacity of the battery. This information should be obtained directlyfrom the distributor.2. Due to the large dimensions and weight of the equipment, it is recommended that theroom provided on the UPS and batteries be located at level "0". Such location allows thepallet truck to be transported directly to the place of foundation. Any other location that |
Related manuals for ReDeal HS 105
manualsdatabase
Your AI-powered manual search engine