COVER HS Series – User manualCOMEX S.A. 365 LCD panel supportThe following section describes the functions and capabilities of the control panel in the powersupply, including key functions and available information from the LCD touch screen.5.1 IntroductionThe power supply panel with LCD display is located on the front panel of the UPS. The LCDdisplay gives the user full access to work status monitoring, switching between operating modesas well as control of work parameters and event logging. The power supply control panel isdivided into three sections, as shown in the figure below. There is a LED display of energy flowand status of each power supply module, LCD display, and keypad with EPO switch. The symboldetails shown on the LCD panel are explained in the table below.123467895BYP INV MUTE1011121: LCD touch screen 2: EPO 3: Volume4: State diode 5: Bypass diode 6: Rec diode7: Inv diode 8: Load diode 9: Battery diode10: Transfer to bypass 11: Transfer to inverter 12: MuteFigure 5-1 View of the power supply control panel.