Red Epic 4K Broadcast Module Operation Manual
                            | |
Contents
| 
COPYRIGHT © 2015 RED.COM, INCR E D 4 K B R O A D C A S T M O D U L E O P E R AT I O N G U I D E 955-0072, REV-E | 12OUTPUT 4K QUAD 3G/HD-SDIREQUIRED ITEMS DSMC BRAIN Adaptor module (either a +1 Adaptor Module or a Module Adaptor) 4K Broadcast Module Four (4) 3G/HD-SDI cables Quad 3G/HD-SDI deviceSET UP 4K QUAD 3G/HD-SDI1. Ensure that the BRAIN is off.2. Install the 4K Broadcast Module on the BRAIN. For more information, go to “Install the 4K BroadcastModule” on page 10.3. Use four (4) 3G/HD-SDI cables to connect the four (4) SDI-OUT ports on the 4K Broadcast Module to thefour (4) 3G/HD-SDI IN ports on a quad 3G/HD-SDI device.NOTE: Be careful to connect each cable from the 4K Broadcast Module to the appropriate connector on thedevice. For example, connect SDI-OUT 1 on the 4K Broadcast Module (top left quadrant) to 3G/HD-SDI IN1 on the device.4. Turn on the BRAIN.5. Select the frame rate:A. Go to Menu > Settings > Project > Frame Rates.B. Select a matching Sensor Frame Rate and Project Time Base. |
Related manuals for Red Epic 4K Broadcast Module
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine