Red Epic DSMC MEDIA Operation Manual
Also see for DSMC MEDIA: Operation guide
                                                                                | |
Contents
| 
COPYRIGHT © 2014 RED.COM, INCR E D D S M C M E D I A O P E R AT I O N G U I D E 955-0047, REV-F | 16SSD MODULESYou can mount the REDMAG 1.8" SSD to the following modules: DSMC 1.8" SSD Side Module DSMC 1.8" SSD Side Module (DRAGON) Carbon Fiber DSMC 1.8" SSD Side Module (DRAGON) REAR SSD MODULEDSMC 1.8" SSD SIDE MODULESRED offers the following DSMC 1.8" SSD Side Modules: DSMC 1.8" SSD Side Module: Mounts to any standard aluminum DSMC BRAIN. DSMC 1.8" SSD Side Module (DRAGON): Mounts to a DSMC with a RED DRAGON sensor, and is only availablewith a DSMC with a RED DRAGON sensor. Carbon Fiber DSMC 1.8" SSD Side Module (DRAGON): Mounts to a carbon fiber DSMC BRAIN, and is only avail-able with a carbon fiber DSMC BRAIN.Each DSMC 1.8" SSD Side Module attaches to the DSMC so that you can mount a REDMAG 1.8" SSD to yourcamera.Each DSMC 1.8" SSD Side Module has the same EVF/LCD LEMO connector, user keys, REC button, and LEDas the RED MINI-MAG Side SSD Module.NOTE: The two (2) screws under the SSD slot on the standard aluminum side SSD modules secure an internalbracket that provides structural support. DO NOT loosen these screws. Loosening these screws DOES NOTprovide extra clearance for the SSD.WARNING: The red metal heat sink under the SSD slot on the Carbon Fiber DSMC 1.8" SSD Side Module (DRAGON)may get hot during long-term operation.WARNING: The DSMC 1.8" SSD Side Module is NOT HOT SWAPPABLE, meaning you cannot remove or installthe module while the camera is powered on. Before installing or removing the module you MUST power downthe camera. Failure to do so may result in damage to the module or DSMC that will not be covered under war-ranty.DSMC 1.8" SSD Side Module(Rear and Front) |
Related manuals for Red Epic DSMC MEDIA
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine