RedMax BCZ3050S Owner's/operator's Manual

Also see for BCZ3050S: Operator's manual Owner's/operator's manual

Contents

US-17BCZ3050S/SW/3060TSUS• When sharpening, removing, or reattaching the blade, besure to wear thick, sturdy gloves and use only proper toolsand equipment to prevent injury.■ CHOOSE THE BLADEChoose a suitable recommended cutting attachment according tothe object to be cut. (OPT5)• When replacing blade always be sure to use products whichhave been certified by RedMax.(1) 9” 22-tooth :SST229(2) 9” 24-tooth :SST249(3) 8” 8-tooth :SGB088(4) 9” 8-tooth :SGB089(5) 8” 4-tooth :SGB048(6) 9” 4-tooth :SGB049(7) Nylon line head(A) Under growth(B) Heavy weeds(C) Light weeds(D) GrassWARNING■ SET UP THE BLADE1. Detach the line head assembly. (OPT6)2. Put on the blade, making the markedside face the shaft side, put the holderand the cover on, and fasten the bladewith the nut. (OPT6)TIGHTENING TORQUE :130 – 174 in-lbs(14.7 – 19.6 N.m.)(1) Cover (2) Holder (B)(3) Nut : (STANDARD)■ BALANCE UNIT1. Put on strap and attach unit to strap.2. Slide clamp up or down until unitbalances with head just touching on theground. (OPT7)OPT7(1)(3)(2)OPT6(1)(2)(3)(4)(5)(6) (7)(A)(B)(C)(D)OPT512. Optional blade usageOPT2OPT1OPT4OPT3Blade Kit : 966 42 40-01(1) Shoulder strap(2) Guard(3) J-handle(4) Bracket ASSY(5) Cover(6) Holder (B)Change to the debris guard which issuitable for the metal blade.TIGHTENING TORQUE :26 – 43.5 in-lbs(2.94 – 4.9 N.m.)[BCZ3050S] [BCZ3060TS]Change the loop handle to the J-handlefor safe operation.IMPORTANTIMPORTANT• For security reason, in case of mounting the blade on thisproduct and use it, purchase the blade kit (966 42 40-01)and change guard, handle from the original ones, and useshoulder strap. (OPT1 – OPT4)WARNING