RedMax SRTZ2401 Owner's Manual

Also see for SRTZ2401: Owner's/operator's manual

Contents

RedMax SRTZ2401 Owner's Manual Manual pdf 42 page image

429. MaintenanceEnglish• If waste gets stuck and causes blockage around theintake air cooling vent or between the cylinder fins, itmay cause the engine to overheat, and that in turnmay cause mechanical failure on the part of thebrushcutter. (MA7)(1) cylinder(2) intake air cooling vent (back)■ PROCEDURES TO BE PERFORMED AFTEREVERY 100 HOURS OF USE1. Remove the muffler, insert a screwdriver into thevent, and wipe away any carbon buildup. Wipe awayany carbon buildup on the muffler exhaust vent andcylinder exhaust port at the same time.2. Tighten all screws, bolts, and fittings.3. Check to see if any oil or grease has worked its wayin between the clutch lining and drum, and if it haswipe it away using oil-free, lead-free gasoline.IMPORTANTMA8• Aged fuel is one of major causes of engine startingfailure. Before storing the unit, empty the fuel tankand run the engine until it uses all the fuel left in thefuel line and the carburetor. Store the unit indoortaking necessary measures for rust prevention.10. StorageEnglish(1)(2)MA7