Redpine Signals, Inc. Proprietary and confidential Page 15RRSS99111100--NN--1111--2222//2244//2266//2288 –– SSeellff--CCoonnttaaiinneedd WWLLAANNMMoodduulleess wwiitthh NNeettwwoorrkkiinngg SSttaacckkFigure 7: Opened the COM Port successfullyNOTE: In case the ABRD process fails, the GUI displays a message andopens the COM port with the default settings. If the ABRD processfails, it will mostly because of the connection between the PC and theEVB not being proper. It’s recommended that the serial cable be useddirectly without adapters like a USB-to-Serial adapter.2.2.2: ScanTo scan for the available Access Points and IBSS Stations in all channels, click the“SCAN” button. The list of scanned Access Points and IBSS Stations is displayedon the GUI as shown below. The SSID corresponds to the SSID of the AP/IBSSStation and mode is the security type. The RSSI value is also displayed as anabsolute value4.4 RSSI is a negative value. The RSSI displayed on the GUI is an absolute value.Hence, the lower the value displayed, the better is the Received Signal Strength.
