Regency FireGenie PG121-NG1 Owners & Installation Manual

Also see for FireGenie PG121-LPG1: Owners & installation

Regency PG121/PG131 Zero Clearance Room Sealed Gas Fireplace34MANUAL CONTROL REPLACEMENT1) Unplug the power source.2) Open the bottom louver.5) Remove the valve heat shield by undoing the 2 screws.Valve Heat Shield6) Pull out the ECS box by carefully lifting it up off the velcro.7) Remove the ECS box cover by undoing the 3 screws.8) Unplug in the CAT5 cable of the manual control box from the con-nector in the ECS box.Manual Control BoxLouver BracketECS Box3) Undo the 3 screws to remove the manual control box from thelouver.4) Remove the louver bracket from the manual control box by undoingone screw.9) Plug the replacement manual control switch CAT5 cable into theconnector in the ECS box.10) Re-install the cover on the ECS box. Ensure to fit the rest of the cableinto the groove in the ECS box.11) Put the ECS box back in place under the firebox.12) Reverse steps 5 to 1.MAINTENANCE