Regency GEM54-NG Owners & Installation Manual

Also see for GEM54-LPG: Owner's manual Owners & installation manual

Contents

8Regency Gemfire™ Gas FireplaceINSTALLATIONCaution RequirementsThe top, back and sides of the fireplace are defined bystandoffs. The metal ends of the standoff may NOT berecessed into combustible construction.WARNINGFire hazard is an extreme riskif these clearances (air space) to combustible materials are notadhered to. It is of greatest importance that this fireplace and ventsystem be installed only in accordance with these instructions.CLEARANCESThe clearances listed below are Minimum distances unless otherwise stated:A major cause of chimney related fires is failure to maintain required clearances (air space) to combustible materials. It is of the greatestimportance that this fireplace and vent system be installed only in accordance with these instructions.FBEDAInstalled Closeto FloorG48" (1219mm)4"(102mm) 5-11/16(144mm)28(711mm)20"(508mm)22-1/252-5/860-1/2" (1537mm)Non-combustibleMaterialNon-combustible MaterialNon-combustible MaterialNon-combustible MaterialMetal Stud (header)Wood StudWood StudClearance: Dimension Measured From:A: Mantel Height (min.) 20" (508mm) Top of Fireplace OpeningB: Sidewall 4" (102mm) Side of Fireplace OpeningC: Ceiling(room and/or alcove) 40-7/8" (1038mm) Top of Fireplace OpeningD: Mantel Depth (max.) 13" (330mm) 30" Above Fireplace OpeningE: Alcove Width 83" (2108mm) Sidewall to Sidewall (Minimum)F: Alcove Depth 36" (914mm) Front to Back Wall (Maximum)Note 0" No hearth requiredFBCInstalled Closeto CeilingNON-COMBUSTIBLE REQUIREMENTSFlue ClearancesHorizontal - Top 3" (76mm)Horiztonal - Side 2" (51mm)Horiztonal - Bottom 2" (51mm)Vertical 2" (51mm)