Regency Horizon HZ30E-NG10 Owners & Installation Manual

Also see for Horizon HZ30E: Owners & installation manual Owners & installation manual

42 | Regency Horizon HZ30E-10 Gas Fireplace|42installationREFLECTIVE PANEL INSTALLATION918-901a 05/16/131) Remove the faceplate and glass door if already installed - seemanual for instructions.2) Install the back panel fi rst. Tilt the panel forward - position the bottomof the panel fi rst. Use care not to scratch or mar the panel on thepilot shield.3) Install the left side panel - secure in position with one panel clip andone screw, as shown in the diagram below.4) Install the right side panel - secure in position with one panel clipand one screw.5) Reinstall glass door - reinstall faceplate.6) Final installation1HZ30EREFLECTIVE PANEL INSTALLATIONBefore installation, panels must be handled and cleaned as per instructions noted below:Black Enamel Panels• Black Enamel panels must be inspected for scratches and dimples prior to installation. All claims to be recorded at this time.Claims for damage after installation will not receive consideration.• Black Enamel panels will discolor a little during normal operation. This is normal and should not be considered a defect.* All hand and fi nger marks MUST be cleaned off with a soft cloth. Use an ammonia based cleaner (ie. glass cleaner) to remove anyfi ngerprints before applying heat to the unit.Failure to do this will result in burn stain on panels which you will be unable to remove. Not protected by product warranty.