Regency I1200 Owners & Installation Manual

Also see for Classic I1200S: Owners & installation manual Owners & installation manual

Contents

4 I1200 Regency Wood InsertSAFETY LABELThis is a copy of the label that accompanies eachI1200S Wood Insert. We have printed a copyof the contents here for your review.LISTED FACTORY BUILT FIREPLACE INSERTCERTIFIED FOR USE IN CANADA AND U.S.A.MODEL: I1200STESTED TO:ULC S628-M93 / UL 1482-1998 / ULC S627-00 / UL 737-2000 REPORT NO. 632-3198 (SEPT.1993)DO NOT REMOVE THIS LABEL326COMPONENTS REQUIRED FOR INSTALLATION: 5.5" (140mm) or 6" (152mm)STAINLESS STEEL LINER.STANDARD ADAPTOR (171-932) OR OFFSET ADAPTOR (171-936).OPTIONAL COMPONENT: FAN (170-915), ELECTRICAL RATING: VOLTS 115, 60 HZ, 0.6 AMPS, SCREEN DOOR (846-101)DO NOT REMOVE BRICKS OR MORTAR IN MASONRY FIREPLACE. FOR USE WITH SOLID WOOD FUEL ONLY. DO NOT USE GRATEOR ELEVATE FIRE. BUILD WOOD FIRE DIRECTLY ON HEARTH. OPERATE WITH FEED DOOR CLOSED, OPEN TO FEED FIRE ONLY.REPLACE GLASS ONLY WITH CERAMIC GLASS (5MM). INSPECT AND CLEAN CHIMNEY FREQUENTLY. UNDER CERTAIN CONDITIONSOF USE CREOSOTE BUILDUP MAY OCCUR RAPIDLY. DO NOT OVERFIRE, IF INSERT GLOWS YOU ARE OVER-FIRING.MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS (MEASURED FROM INSERT BODY)INSTALL ONLY ON A NON-COMBUSTIBLE HEARTH RAISED (F) 1.5IN / 38MMABOVE AN ADJACENT COMBUSTIBLE FLOOR. COMBUSTIBLE FLOORMUST BE PROTECTED BY NON-COMBUSTIBLE MATERIAL EXTENDING(E) 16 IN / 405MM TO FRONT AND (G) 8IN / 205MM TO SIDES FROM FUELDOOR.918-666MANUFACTURED BY:FPI FIREPLACE PRODUCTSINTERNATIONAL LTD.6988 VENTURE ST.DELTA, BC V4G 1H4HOT WHILE IN OPERATIONDO NOT TOUCH. KEEP CHILDREN,CLOTHING AND FURNITURE AWAY.CONTACT MAY CAUSE SKIN BURNS.READ ABOVE INSTRUCTIONS.CAUTIONADJACENT SIDEWALL A) 15in / 380mmMANTLE B) 20in / 510mmTOP FACING C 14in / 355 mmSIDE FACING D) 7.375in / 185mmINSTALL AND USE ONLY IN ACCORDANCE WITH THE MANUFACTURER'S INSTALLATION AND OPERATING INSTRUCTIONS. INSTALL AND USE ONLYIN MASONRY FIREPLACE OR FACTORY BUILT FIREPLACE.CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION IN YOUR AREA.UNITED STATES ENVIRONMENTAL PROTECTIONAGENCY CERTIFIED TO COMPLY WITH JULY 1990,PARTICULATE EMISSION STANDARDS.JAN FEB MAR APR MAY JUN JUL AUG SEPT OCT NOV DEC2011 20102 2013(Duplicate Serial #)DATE OF MANUFACTUREMADE IN CANADA326NOTE: Regency units are constantly beingimproved. Check the label on the unit and ifthere is a difference, the label on the unit isthe correct one.