Regency L234-NG10 Owners & Installation Manual

Also see for L234-LP10: Owners & installation manual

Regency L234-NG10 Owners & Installation Manual Manual pdf 30 page image

30 | Regency ® L234-10 Direct Vent Gas Insert|30maintenanceFAN REPLACEMENT1) Unplug the power source.2) Remove the faceplate.3) Remove the safety screen.b) Swing the door out 45 degrees and lift upand out.5) Remove the logs.6) Remove brick panels, if installed.7) Remove the burner by undoing the 3 screws.8) Remove the burner tray by undoing the 4screws.Burner RemovedBurner Tray Removed9) Remove the rear log tray by undoing the 3screws.Rear Log Tray Removed4) Remove the glass door.a) Pull the spring hook on the left that holdsthe door in place. Place the hook intothe opening towards the outside of thebracket. Repeat on right side.Spring HookOutside opening