Regency L234-NG10 Owners & Installation Manual

Also see for L234-LP10: Owners & installation manual

Regency L234-NG10 Owners & Installation Manual Manual pdf 7 page image

Regency ® L234-10 Direct Vent Gas Insert | 7|7installationCLOTHING OR OTHER FLAMMABLEMATERIAL SHOULD NOT BE PLACEDON OR NEAR THE APPLIANCE.CHILDREN AND ADULTS SHOULD BEALERTED TO THE HAZARDS OF HIGHSURFACE TEMPERATURES, ESPE-CIALLY THE FIREPLACE GLASS, ANDSHOULD STAY AWAY TO AVOID BURNSOR CLOTHING IGNITION.INSTALLATION AND REPAIR SHOULDBE DONE BY AN AUTHORIZEDSERVICE PERSON. THE APPLIANCESHOULD BE INSPECTED BEFOREUSE AND AT LEAST ANNUALLY BY APROFESSIONAL SERVICE PERSON.MORE FREQUENT CLEANING MAYBE REQUIRED DUE TO EXCESSIVELINT FROM CARPETING, BEDDINGMATERIAL, ETC. IT IS IMPERATIVETHATCONTROL COMPARTMENTS, BURNERSAND CIRCULATING AIR PASSAGEWAYSOF THE APPLIANCE BE KEPT CLEAN.DUE TO HIGH TEMPERATURES, THEAPPLIANCE SHOULD BE LOCATEDOUT OF TRAFFIC AND AWAY FROMFURNITURE AND DRAPERIES.WARNING: FAILURE TO INSTALL THISAPPLIANCE CORRECTLY WILL VOIDYOUR WARRANTY AND MAY CAUSE ASERIOUS HOUSE FIRE.YOUNG CHILDREN SHOULD BE CARE-FULLY SUPERVISED WHEN THEY AREIN THE SAME AREA AS THE APPLI-ANCE. TODDLERS, YOUNG CHILDRENAND OTHERS MAY BE SUSCEPTIBLETO ACCIDENTAL CONTACT BURNS. APHYSICAL BARRIERS IS RECOMMEND-ED IF THERE ARE AT RISK INDIVIDUALIN THE HOUSE. TO RESTRICT ACCESSTO A FIREPLACE OR STOVE, INSTALLAN ADJUSTABLE SAFETY GATE TOKEEP TODDLERS, YOUNG CHILDRENAND OTHER AT RISK INDIVIDUALS OUTOF THE ROOM AND AWAY FROM HOTSURFACES.FOR YOUR SAFETYThis appliance requires air for proper combustion.Always provide adequate combustion andventilation air. Follow instructions and informationin CSA B149.1 (in Canada) or the National Fuel GasCode ANS Z223.1/NFPA (in the USA), regardingrequirements for combustion and ventilation air.A BARRIER DESIGNED TO REDUCETHE RISK OF BURNS FROM THE HOTVIEWING GLASS IS PROVIDED WITHTHIS APPLIANCE AND SHALL BEINSTALLED FOR THE PROTECTIONOF CHILDREN AND OTHER AT-RISKINDIVIDUALSIF THE BARRIER BECOMES DAMAGED,THE BARRIER SHALL BE REPLACEDWITH THE MANUFACTURER'S BARRIERFOR THIS APPLIANCE.ANY SAFETY SCREEN, GUARD, ORBARRIER REMOVED FOR SERVICINGAN APPLIANCE MUST BE REPLACEDPRIORTO OPERATINGTHE APPLIANCE.