Regency L965E-NG Owners & Installation Manual

Also see for Horizon HZ965E: Owners and installation manual

Contents

FULL SCREEN DOOR / SCREEN INSTALLATIONFigure 96: Optional Front Installed.Arched Screen DoorsFigure 97: Location on unit to install Full Screen or Screen.Figure 98: Line up Tabs with slot on UnitFigure 99: Optional FrontInstalled.Both the full screen door and screen both install onto the front of the unit usingtwo(2) tabs, one on each side. These tabs secure the front to the fi replace,allowing for easy removal for service access.Install the front by lifting it parallel to the fi replace with the mounting brackettabs pointing towards the fi replace. Slide the tabs all the way into the slotsbetween the Glass Door Frame and the drywall flanges of the fireplace.Pull down on each corner to make sure the tab is engaged with the hanger.IMPORTANT: Ensure that the minimum gap required between the OptionalFront and wall of the unit is maintained (refer to Figure 99). Not maintain-ing the proper gap will cause the unit to run at elevated temperaturesand result in an unsafe conditionThe face should be cleaned before the fireplace is turned on for the first time.The arched full screen door unit uses four(4) tabs, two on each side.These tabssecure the front to the fi replace, allowing for easy removal for service access.Note: There are three (3) slots on each tab 1/2" apart to allow adjustmentdepending on the thickness of the finishing material.50 Regency L965E / HZ965E Gas FireplaceINSTALLATION