TRANSMITTER (Remote Control with LCDDisplay)The Profl ame Transmitter uses a streamline design with a simplebutton layout and informative LCD display (Figure 99).The Transmitter is powered by three (3) AAA type batteries. AMode Key is provided to Index between the features and a Ther-mostat Key is used to turn on/off or index through Thermostatfunctions (Figure 103 & 104).RECEIVERThe Profl ame Receiver (Figure 101) connects directly to the gas valve,stepper motor, DFC, and Fan Control Module with a wiring harness. TheReceiver is powered by 110 V and uses four (4) AA type batteries forbackup. The Receiver accepts commands via radio frequency from theTransmitter to operate the appliance in accordance with the particularProfl ame system confi guration. The Receiver three (3) position sliderswitch can be set to one of three positions: ON (Manual Override),Remote (Remote control), or Off.Figure 103: Proflame Transmitter.Figure 104: Proflame Transmitter LCD Screen.Figure 105: Proflame Receiver.FAN CONTROL MODULEFan Control Module (FCM) offers the added ability to controlthe fan speed through six (6) speeds, a remotely actuated 120Voutlet and a constantly powered 120V outlet. The FCM providesDC power to the Receiver allowing the batteries to be used onlywhen line power is interrupted or lost (see Figure 106).Figure 106: Proflame Fan Control Module.Regency L965E / HZ965E Gas Fireplace 5353INSTALLATIONOPERATING INSTRUCTIONS