Regency P42 Owners & Installation Manual

Also see for Gas Fireplace P42-LP4: Owners & installation manual

Regency P42 Owners & Installation Manual Manual pdf 29 page image

Regency ® P42-4 Zero Clearance Direct Vent Gas Fireplace28BAY LOUVERS1) Install top louver by sliding the two bracketclips into the brackets located on top of thebay door. See below. The fitted louver leavesa small gap between faceplate bottom andlouver top.Attach 4 supplied magnets each to the back ofthe top and bottom trim pieces, and attach trimto the top and bottom of Bay door.2) Install bottom louver by sliding the twobracket clips into the brackets locatedunderneath the bay door. Install bottomlouver by sliding the two bracket clips into thebrackets located underneath the bay doorand secure with 1 screw on each end.Note: Top and bottom louvers andbrackets are different.OPTIONAL BAY DOORThe Bay louvers MUST be usedwith the Bay glass option.The optional Bay door is an overlay on thefl ush front. The standard flush door and glassmust remain on the unit.1) Unhook the 2 spring loaded hooks from thebottom of the flush door.2) Hook the top of the bay door over the flushdoor flange and swing the bottom againstthe bottom flange of the flush door.3) Secure to the flush door bottom bracket with2 screws provided.4) Reconnect the 2 spring hooks securing theflush door.Note: If any maintenance etc. must bedone in the fi rebox, fi rst remove theBay louvers and door.INSTALLATIONOptional Bay Trim3) Slide the valve extension knobs onto thevalve knobs.