Regency PTO30-NG1 Owners & Installation Manual

Also see for PTO30-NG1: Owners & installation manual

Regency PTO30-NG1 Owners & Installation Manual Manual pdf 22 page image

22 | Regency Plateau® PTO30-1 Outdoor Gas Fireplace|22installationOPTIONAL GLASS SURROUND INSTALLATION1OUTDOOR SERIES919-037 10/30/14OPTIONAL GLASS SURROUND/WINDSHIELD INSTALLATION1. Remove metal fasteners from the corner brackets.2. Assemble the 4 pieces of the glass surround/windshield and fastentogether with 4 corner top brackets and supplied nylon fasteners asshown below.3. Using a flat screwdriver, secure 4 top corner brackets with nylonfasteners in each corner, bracket should be flush with the top of glassas shown below.5. Secure bottom corner brackets with nylon fasteners in each corner.6. Flip the glass back over and place on a soft surface. The glass is nowright side up. The glass should be raised up 1/2" in bracket as shownbelow.4b. Use supplied spacer tool to determine where the bottom bracketshould be placed and secured.4a. After the 4 top brackets are installed - flip over and place on a softsurface, to install the 4 bottom brackets. 7. Place assembled glass surround/windshield on table top - ensure glassis centered on the table top. Once in correct position, lift up one end,apply double sided tape that has been cut to size, to the bottom of thebrackets. Repeat process on other end. Press down firmly from tosecure glass surround/windshield in position. Use care not to scratchsurfaces.1/2"Insert nylon fastenerhere.Spacer toolBottom BracketTop BracketNylon fastenersNylon fastenersPTO 30-1Part No. 376-932Overall Dimensions: 37-15/16" long x 12-13/16" wide x 5-5/16" high4 Piece Glass SurroundPTO60-1Part No. 377-955Overall Dimensions: 68" long x 12-13/16" wide x 5-5/16" high